|
Click For Bigger
Picture
Click
Here For Dimensions
|
Passenger Side Alternator Bracket
This bracket is used for
more radiator hose space on vehicles not using air conditioning.
Alternator Bracket P/S #204R -
$70.00
|
|
|
Click For Bigger
Picture
Click
Here For Dimensions
|
Tuned Port Injected
System Brackets
Designed for Tuned Port Injection Systems. Works well with most
induction systems. Single or multiple carbs, tunnel rams. etc.
Bolts to heads and water pump. Will clear most valve covers.
Air Compressor
Bracket #121R - $85.00
Alternator Bracket #221L - $85.00
|
|
|
Click For
Bigger Picture
Click
Here For Dimensions
|
Low Profile Vette/Camaro
Engineered for low hood applications on any vehicle with a wide
engine compartment - Trucks, 50-60's cars etc. Bolts to
the heads and water pump
Air Compressor
Bracket #118R - $85.00
.
Alternator
Bracket #218L - $85.00
|
|
|
Click For
Bigger Picture
Click
Here For Dimensions
|
Low Profile Vette/Camaro
Alternator Passenger Side
Engineered for low hood applications on any vehicle with a wide
engine compartment - Trucks, 50-60's cars etc. Bolts to
the heads and water pump. Bolts opposite to bracket #118R and
218L.
Air Compressor
Bracket #118L - $85.00
.
Alternator
Bracket #218R - $85.00
|
|
|
Click For
Bigger Picture
Click
Here For Dimensions
|
1964-'68 Chevelle, EL Camino
Bracket system is designed
for big block Chevrolets using short water pump. Brackets
bolt to top water pump bolt and two points on the outer cylinder
head. Will work with tall valve covers.
Alternator & Power Steering
Brackets #601L - $175.00
Air Compressor
Bracket #118R - $85.00
.
|
|
|
Click For
Bigger Picture
Click
Here For Dimensions
|
Low Alternator
Mounts alternator low on
the driver's side. Bracket has a lot of adjustment available.
Low Alternator Bracket #208L - $65.00
|
|
|
Click For Bigger
Picture
Click
Here For Dimensions
|
Low Alternator
Mounts alternator low on
the driver's side, is designed to use new GM CS130
alternator with mounting ear in the 2 o'clock position. Bracket
requires less space than the standard GM alternator and has a lot
of adjustment available.
Low Alternator Bracket #210L - $65.00
|
|
|
Click For
Bigger Picture
Click
Here For Dimensions
|
Low Air Compressor
Bolts to fuel pump mounting
flange. May be driven off crank and fan pulleys or crank pulley
ONLY. REQUIRES USE OF A REMOVE FUEL PUMP.
Low Air Compressor Bracket #108R
- $70.00
|
|
|
Click
For Bigger Picture
Click
Here For Dimensions
|
Power Steering
Designed for the Chevrolet Saginaw non-metric power steering
pump with the attached reservoir. Allows clearance for the
alternator belt no matter where the alternator is mounted.
Short water pump applications are normally driven off a 3 groove
crankshaft pulley.
Power Steering Bracket #403L
- $65.00 ea.
|
|
|
Click
For Bigger Picture
Click
Here For Dimensions
|
Type 2 Power Steering Bracket
This bracket is designed to
be used with the metric GM remote reservoir Type 2 pump. Designed
for street rod applications, it sits high enough to clear most
chassis parts and steering gears. WILL NOT WORK WITH LOW PROFILE
BRACKETS. Pump is driven off the outer groove of a 3 groove crank
pulley. Pump uses and aluminum V-belt pulley-See Pulleys
under parts.
Type 2 Power Steering Bracket
#413L- $65.00
|
|
|
Click
For Bigger Picture
Click
Here For Dimensions
|
Type 2 Power Steering Bracket
This bracket is designed to
be used with the metric GM remote reservoir Type 2 pump. Designed
for Alan Grove's low profile applications, it sits low enough to
clear low profile alternator belt.. Pump is driven off the outer
groove of a 3 groove crank pulley. Pump uses and aluminum
V-belt pulley-See Pulleys under parts.
Type 2 Power Steering Bracket
#415L- $65.00
|
