|
|
Click for larger view
Click
Here For Dimensions
|
Serpentine Vette/Camaro
System
Designed for
vehicles with low hood clearance and wide engine compartments.
Trucks, '50's and '60's cars, even Vettes and Camaros. These
brackets bolt to the head and top water pump bolt holes. The alternator. bracket will fit all '69 and newer heads. The A/C
compressor bracket fits all GM aluminum heads and may be used on
'69-'86 cast iron heads by drilling and tapping one hole for the
upper mounting point. Bracket comes complete with idler
assembly and CNC machined aluminum idler pulleys with double row
bearings.
Part Number 307 A/C & Alt. (long pump)-$285.00
Same basic bracket system but designed for '87 and later cast
iron heads incl. the popular cast iron Vortec heads.
Part # 308 A/C & Alt. (long pump)-$285.00
|
|
|
Click For Bigger Picture
Click
Here For Dimensions
|
Driver's Side A/C Bracket
This bracket works well if you are
adding a compressor to a long water pump application and want to
leave the alternator in the factory location on the passenger
side.
Air Compressor Bracket #119L (long pump) - $85.00
ea.
|
|
|
Click for larger view
Click
Here For Dimensions
|
Driver's Side A/C Bracket
This bracket works
well if you are adding a compressor to a long water pump
application and want to leave the alternator in the factory
location on the passenger side, except this bracket bolts to the
front of the head and water pump eliminating exhaust mounting. WILL
NOT WORK WITH FACTORY POWER STEERING BRACKET
.
Air Compressor #137L - $85.00
|
|
|
|
Click For Bigger Picture
Click
Here For Dimensions
|
Low
Mount A/C Bracket
Tight-fit design fits narrow
frames. Compressor bolts to fuel pump mounting flange for
strength. May be driven off crank and fan pulleys or crank
pulley ONLY. REQUIRES USE OF REMOTE FUEL PUMP. Check our
dimension requirements before ordering.
Low A/C Compressor #107R - $70.00
|
|
|
Click For Bigger Picture
Click
Here For Dimensions
|
Low
Mount Alternator Bracket
Mounts the alternator low on
the driver's side. Bolts to block and water pump for the
stability needed when mounting the alternator low with a long
water pump.
Low Alternator Bracket #214L -
$75.00
|
|
|
|
Factory
Alternator Support Bracket
This bracket kit was designed
to be used with the stock long pump alternator mount. It
eliminates the need for a mounting hole in the head when using
early heads on a later application.
Alternator Support Bracket
#219R - $25.00
|
|
|
Click For Bigger Picture
Click
Here For Dimensions
|
Mid-Mount Alternator
This bracket mounts the
alternator just above the pump inlet. Bolts to head and water
pump. Works well in low hood applications or for extra space for
TPI fuel lines, etc. FITS LONG PUMP ONLY. This bracket can also
be used with engines that have no bolt holes in the heads by
using the optional 215RO below.
Mid-Mount Alternator Bracket
#215R - $40.00
|
|
|
|
215R
Support Bracket
This optional bracket kit
allows the 215R to be used on engines without a hole in the
head. Bolts to water pump attachment points and back of the
alternator.
Alternator Support Bracket
#215RO - $25.00
|
|
|
Click For Bigger Picture
Click
Here For Dimensions
|
Power Steering
Bolts to the front of the block and water pump boss. Mounts
the pump in approximately the same position as the factory
bracket without using the head or exhaust bolt holes.
#402L - $65.00
|
|
|
Click For Bigger Picture
Click
Here For Dimensions
|
Power
Steering (Type
2)
This bracket is designed to
be used with the metric G.M. remote reservoir type II pump.
Designed for street rod applications, it sits high enough to
clear most chassis parts and steering gears. WILL NOT WORK
WITH LOW PROFILE BRACKETS. Pump is driven off the inner
groove of a 3 groove crank pulley. Pump uses an aluminum V-belt
pulley available from us or other street rod suppliers. Power
Steering Bracket #410L -$65.00
|
