|
|
|
888-680-1932
Order Line |
|
|
|
HEIDT'S
|
|
|
THE
BEST RIDE IN TOWN FOR CLASSIC TRUCKS |
New! Free
shipping on all complete IFS front ends!
Free 11" Brake Upgrade!
Free dropped spindle upgrade!
|
|
|
|
'53-'56
Ford
|
|
'55-'59
Chevy
|
ALL
NEW!
NOT A MUSTANG CONVERSION KIT!
|
|
Heidt,s SUPERIDE II
IFS System uses our famous Mustang II dropped spindle to allow for a
front mount rack & pinion unit to ease motor installation. It uses
a geometry design very similar to the Mustang II which works well on
the classic trucks. The upper control arms use threaded adjusters for
the wheel alignment. These threaded adjusters, unlike eccentric
adjusters, will never "slip" and lose alignment no matter
how big a bump you hit. 'Smooth" describes the ride: very low and
highly steerable with no bumpsteer and built-in anti-dive. Installing
the 1-piece crossmember is an easy one-step operation. Combined with
detailed instructions your installation will be as smooth as your ride
with your new SUPERIDE II from Heidt's Hot Rod Shop.
|
HERE'S
WHAT YOU GET IN THE KIT
|
 |
Main
crossmember T.I.G. welded for maximum strength andgreat looks
|
|
Our exclusive
one piece dropped Mustang II spindles
|
|
Adjustable
tubular arms.
|
|
11" Disc
Brake vented rotors (Choose either Ford or Chevrolet pattern)
|
|
Adjustable Coil Over Shocks
with Chrome Springs
|
|
Front
Mount Rack and Pinion Steering
|
|
Stainless Steel
Adjusters with Urethane Bushings
|
|
Factory Ball Joints and Tie Rod Ends
|
 |
'53-'56
Ford F-100, BX-316 - $2,699
'55-'59 Chevy Truck, BX-307 - $2,699
'47-'54 Chevy Truck, BX-306 - $2,699
|
 |
|
|
Available
Options |
|
BS-037
|
Polished Shock Bodies |
$80.00 |
|
BS-026 |
Polished Stainless Steel Arms A With Polished Adjusters
And Hardware |
$579.00 |
|
BS-025-N |
Narrowed Control
Arms, 3/4'' Per Side |
N/C |
|
BS-026-N |
Narrowed Polished
Stainless Steel Control Arms, 3/4'' Per Side |
$579.00 |
|
MP-035 |
Polished Stainless Steel Ball Joint Caps, Pr |
$35.00 |
|
MP-018-C-K |
Chrome Manual
Rack And Pinion |
$110.00 |
|
MP-038-K |
Power Rack And
Pinion |
$150.00 |
|
MP-017-SS |
Polished Stainless
Steel Tie Rod Ends |
$78.00 |
|
BS-056 |
Stabilizer Bar Plain |
$179.00 |
|
BS-056-C |
Stabilizer Bar Chrome |
$249.00 |
|
DF-201-5.0-K |
11'' Ford
Rotor GM Caliper 5'' Bolt Circle |
$50.00 |
|
|
Add Wilwood
Polished Or Black Calipers (To Above Kit) |
N/C |
|
DF-201-5.5-K |
11-5/8'' Rotor
Early GM Calipers 5-1/2'' Bolt Circle |
$246.00 |
|
BS-202-B-K |
11'' Wilwood Polished Hub Kit With Polished Or
Black Calipers |
$449.00 |
|
|
Add Red Calipers (To Above Kit) |
$30.00 |
|
|
Add Slotted
And Cross Drilled Rotors (To Above Kit) |
$90.00 |
|
DF208-P/B-K |
12'' Wilwood Polished Hub Kit Polished Or Black
Calipers And Slotted And Cross drilled Rotors |
$619.00 |
|
|
Add Red Calipers (To Above Kit) |
$30.00 |
|
DF-206-B-K |
13'' Wilwood Big Brake Kit With Black 6 Piston
Calipers, Black Aluminum Hubs With Slotted And
Crossdrilled Rotors |
$1369 |
|
|
Add Polished Calipers (To Above Kit) |
$200.00 |
|
|
Add Red Calipers (To Above Kit) |
$230.00 |
|
BX-055 |
Stainless Steel Brake Lines For Billet
Calipers |
$40.00 |
|
DF-020 |
Stainless Steel Brake Lines
For GM Calipers |
$50.00 |
|
|
|
Final
ride height from spindle to bottom of frame:
|
'47-'54
Chevy Pick-Up 2"
|
|
'55-'59
Chevy Pick-Up 2-1/2"
|
|
'53-'56
Ford Pick-Up 0
|
|
|
Back
to Heidt's
|
|
|
|
